供應denoh柴油電焊機HW450DS發電機(組)

電王HW450DS柴油雙把發電電焊機參數

           焊接輸出（下降特性）

額定功率 KW                   12.38 

額定電流 DCA                  360

額定電壓 DCV                   34.4

空載電壓 DCV                   80 

額定使用率 %                    50 

電流調節範圍(單把) A         60-400 

電流調節範圍(雙把) A         30-200 

額定轉速 rpm                     3,000 

類 型                                   直流整流 

適用焊條 φmm                   2.0～6.0

              焊接輸出（平特性） 

額定功率 (KW)                     -/9.6 

電壓調節 (V)                        -/18-35

額定使用率 (%)                    -/80 

額定電流 (A)                        -/320 

                   輔助電源

額定輸出 KVA                       15 

額定電壓 V                            380

額定電流 A                            21.7

功率因數 %                           80

頻 率 Hz                               50

額定速度 rpm/min               3600

激勵方式                               無 刷

驅動方式                               直接耦合

                     發動機

名稱                                      久保田D1105

形式                                      4衝程4缸

排氣量 l                                 1.123

額定輸出 KW                         21.7

額定轉速 rpm                        3600

啟動方式                                電起動

燃料                                       輕柴油

冷卻方式                                水冷

                       其他

油箱容量 l                              37

尺寸 mm                        1530×710×865

淨重 Kg                                 510

電王發電電焊機HW450DS日本久保田KUBOTA柴油雙把水冷靜音400A纖維素下向氬弧引擎電焊機

DIESEL ENGINE-DRIVEN DC WELDER/AC GENERATOR

One Unit ENGINE DRIVEN WELDERS HW450DS for All Your Welding Needs!

Engine Driven Welders incorporate a gasoline, diesel, or propane fueled engine coupled to an electrical generator to produce power for Stick, TIG, MIG and Flux-Cored welding. Engine driven welders are typically transported on a truck or trailer and are primarily used outdoors. The electricity generated by an engine driven welder powers fans, pumps, air compressors or other electrical tools commonly found on jobsites. During power outages, an engine driven welder can also be used as a backup generator.

450A DC Arc Welding Power Source

HW450DS can perform high-quality welding on pipelines and other welding methods.（Types of welding: Stick, Tig, Mig, Flux-cored, Gouging, etc.）

High-Capacity High-Performance Generator

The unit can also be used as a 15kVA/50Hz high-capacity generator. With a voltage regulation of within ±1.5%. High-quality AC power can be used while welding is being performed.

Low Fuel Consumption and Long Life

The unit incorporate high-output diesel engine featuring low fuel consumption. Operation at low speed is easy on the engine, facilitating especially long life.

Special Design Facilitates Use in Virtually Any Location

The unit has been designed to operate in virtually all locations, from very hot to cold climates. It is ideal for high-quality welding and as a dependable source of power.